Showing posts with label Kayleigh Lush. Show all posts
Showing posts with label Kayleigh Lush. Show all posts

Wednesday 17 September 2014

Lush

This beautiful photo of Kayleigh Lush was one of the 100 photos taken by Ray Rapkerg and published on Twitter.



It's another interesting and challenging pose and also presents a great opportunity for me to practice sculpting hair.

The fingers of the right hand only make light fingertip contact with the ground which would present a problem during printing, so I have added a thin disc to anchor the hand firmly and take the weight of the right forearm.




Here is another angle which gives a better view of the hair.



The model printed well at the first attempt but needed plenty of support material under the face and breasts.


Here is a selection of views after removing the support material and ending with a video showing the model from all sides.









The next picture and the video were taken in full sunlight which brings out the amazing sheen in the printed plastic. It's called Christmas Green PLA from 3D Filaprint.




The obligatory full rotation view video.


Tuesday 25 February 2014

Kayleigh

One of the most beautiful poses I've seen recently on Pinterest was this one.



It had been repinned many times, so clearly other people agreed with me, but wasn't being properly credited. I used Google image search to track down the original version and discovered that the model is Kayleigh Lush.


I used my favourite character modelling software to emulate the pose (not exactly right, but good enough to capture the spirit of the picture, I hope) and then exported an OBJ file. I then used Blender to correct the orientation and scale and to flatten the base and remove the eyelashes, before exporting an STL file.


Here is the screen capture of the 3D model in Blender.




This time I used Project Miller again to select the external surfaces of the model, then used Kisslicer to generate the gcode file with full support turned on and printed in white PLA from Faberdashery at 0.15 mm resolution. 

Another pretty successful print, in my view.



With hindsight, it might have been better to have sliced with Cura and used the expert setting called 'Fix Horrible' - type B, which closes all internal holes and deals much more nicely with limb overlaps. Maybe next time.