Showing posts with label Blender. Show all posts
Showing posts with label Blender. Show all posts

Saturday 2 January 2021

Triangle

I started this blog post a good 7 months ago but sadly, lost the whole article before it was published. This time I shall try to be more careful!

The idea for this original pose started out when I was reviewing one of my previous 3D prints called 'Balance' which, as the name suggests, had to be balanced quite carefully or it would topple sideways. The right knee was much too close to the left foot and, as a result, any slight shaking in the room would cause the statue to fall.


I decided to create a pose where the model would be resting on her right knee and the full length of the left shin, but with a triangular shaped base that would be much more stable. I thought it could work well if the model was reaching down with her right hand, to grasp the right foot, and reaching up with her left hand to touch her hair.
This is the pose that I came up with.

Notice how most of the features are oriented vertically rather than horizontally, which greatly reduces the need for extra support material. In fact, the only place that needed support adding was between the legs to support the genital area.


Tilting the head upwards prevents the chin and tip of the nose from needing any support. The bobbed hair-style is just the right length to rest on the shoulders and clavicles. The left breast is pulled upwards by the raised left arm, but the right breast is also sized so that the underside projects out at 50-60 degrees, which most 3D printers can cope with without needing support.

The hair looks great in these beautiful NVIDIA Iray renders within Daz3D, but there is no way they can be 3D printed without significant modification. My standard process for making 3D-printable models now flows like this:

  • Export the OBJ from Daz3D
  • Import in Blender - the body and the hair come in as separate objects
  • Clean up the body by deleting any unwanted mesh parts like the teeth and front layer of the corneas
  • Cut loops out of the inner eyelids and bridge across to the eyeball so that they are cleanly connected 
  • Completely remodel the hair by shrink-wrapping a fairly dense ico-sphere onto it so that it adopts the general shape of the hair, and then delete the original hair object
  • Use Blender's sculpt tools to improve the look of the hair by smoothing out spiky areas first and then adding details to make it look more realistic
  • Use a Boolean modifier to combine the new hair object and the body object into a single model
  • Export from Blender as an STL file
  • Perform any additional mesh clean-up as necessary using netFabb Basic, Windows 3D Builder (and, of course, the wonderful Project Miller if you can find a copy)
If all has gone well, you should now have a single, manifold mesh that will print with no errors.


The prints of this model worked really well in my twotrees Sapphire-S coreXY printer which now generates by far the cleanest set of prints of any that I own.







I liked the model so much that I decided to try printing a really large copy on my Creality CR-10S which has a build volume of 30x30x40 cm. The printer ran for 36 hours and used up half a kilo of metallic bronze coloured filament but the result was well worth the effort.




Sunday 10 May 2020

Some catching up - Belovodchenko and Barbati

This blog has been a little neglected by me over the last year, but seemingly not by all of you, since the number of views recently passed the 150,000 mark. That's an awful lot of exposure! So, to say 'thank you' to all of my visitors, I wanted to share some of my recent creations with you.

I am still using Daz Studio to generate the posed models and export the OBJ files which means I'm afraid I still can't share the models with you. Increasingly, I am sculpting my own hair designs in Blender 2.80 and one day maybe I'll be able to create a full model of my own.

Since posting Tam, I was featured in an article for 3D-Tisk.cz  by Jan Homola - if you view it in a Chrome browser, Google translate does a good job of showing you the article in your own language.


My next project was inspired by another photo that looked as though it would need a minimal amount of support material to print. It comes from a series called Bodyscape Art by Anton Belovodchenko and I hope he won't mind me reproducing it here.




The pose was relatively straightforward to reproduce and, as expected, the print doesn't need any support material at all. The hair was completely hand-sculpted in Blender with the long ends curled up in the small of her back.







Overall, a very satisfying print that I am very pleased with.


The other sculpture I've been working on was inspired by a photo that I found on Pinterest by Niki Barbati. I can't find it now so I'll have to share the copy I found and hope that Niki likes my tribute enough to allow me to share it here.



I re-imagined this model with long hair that reached to the floor and predicted that, once again, no support material would be required to print it.

Here is the model I created using Daz Studio and Blender.



And here is the finished print in bronze PLA.



I liked this one so much that I printed a second copy in some new Fillamentum Mukha PLA which looks stunning.




So, that's now all up to date. I'd better start planning the next sculpture and looking for some printspiration.

Thursday 3 October 2019

Tam

I've been wanting to sculpt this pose for a long time. I love the intertwined limbs and the opportunity to rest the chin on the knee to avoid using support material. I think the photo is by Tam Nguyen but I haven’t been able to locate it online. 


This type of pose is sometimes called an ‘implied nude’ because the breasts and genitals are not visible in the photo. This doesn’t usually affect the 3D version, of course, since a sculpture can be viewed from any angle, but in this case the only way to pose the figure is with the breasts compressed by the limbs.

My first attempt worked out OK as a pose, but failed as a 3D print because I tried to make the hair out of individual strands and the retractions just ground up the filament - should have guessed!

So I reverted to my tried and trusted formula of selecting a nice hairstyle and then shrink-wrapping and resculpting it in Blender.


I chose a nice metallic grey Fillamentum PLA filament for this print and sliced the model with Simplify3D. The print was made on my new Sapphire-S coreXY printer from twotrees adapted with a Flex3Drive extruder system. This keeps the print-head as lightweight as possible, giving some of the smoothest prints I've ever achieved.







I'm particularly pleased with how well the sculpted hair has printed on this model. It can still be improved further, though, and I'm working on that. The second version, lower down this page, has more detail sculpted in the flatter areas.










I had to add automated support material in a couple of places - under the left breast and the left front part of the hair. Unfortunately, this did leave some nasty scarring visible on the thigh and abdomen, which I was unable to hide. This set me thinking about other ways to add support.

It occurred to me that one way to avoid the ugly scars left after removing support material would be to try and construct a sort of platform sitting over the left leg on which the support could then rest. I fired up Blender and came up with these pieces of scaffolding.



The larger piece supports the nose and the dangling strands of hair. The smaller piece supports the underside of the left breast.


The innovation here is that I realised I could combine manually created scaffolding that projects into difficult to reach areas, with auto-generated support provided by the slicer to fill in the last few millimetres.
By using this approach, I can scale the model up to any size without having to worry about the support gap - it will always be perfect for my printer because the final gap is still decided by the slicer software.


Both support pieces broke away cleanly from the model leaving no scarring anywhere on the thigh or abdomen - a much cleaner result!
Notice in the picture below how the small chunks of auto-generated support sit on top of the large manually created blocks.



You can also clearly see here how much better the hair looks now with the extra detail sculpted into it.

Saturday 9 June 2018

Reflections

I started working on this sculpture a few years ago but I wasn't happy with my first attempt so I put the project on hold. It all began when I saw online (I can't remember where) a picture of a small statuette called 'Reflections' by a 20th century sculptor called Harriet Whitney Frishmuth (she hated being called a sculptress!) 



She studied under Rodin before moving to America and doing most of her work there. Some of her larger works are on display in museums across the USA, including the Met in New York, but she also produced smaller pieces such as this one which regularly come up for sale in art auctions and can fetch hundreds of thousands of dollars. I think I would rather make my own copy! 


Most of the time, I have to work from a single photo when posing the model in Daz 3D, but in this case I managed to find another site with an auction catalogue that contained photos of a different copy of Reflections (sculptors often made iterative changes to their best-selling works). In this case, the statue had been photographed from every angle. 

Reflections looked like a great challenge because the pose can be made virtually support-free. I used the Victoria 6 HD female Genesis 2 base model in Daz Studio 4 and began the process of painstakingly moving each joint into the perfect position to capture the pose as accurately as possible. 


I had to position the fingers very carefully, ensuring that the tip of each finger pressed slightly into the skin it was resting upon. Details like this help the model to print successfully without needing to add support.

I have been experimenting with a new technique to get the eyes to print better. This involves carefully deleting the outer layer of the eyeball which represents the cornea. The layer underneath (the iris) has a central depression, but not a full hole, which acts as the pupil. This needs enlarging a little to make it show up in the model but the effect is well worth the effort.

I decided to model the hair myself in Blender’s Sculpt mode, which I am beginning to get the hang of using. I wanted a full-bodied style resting easily on the shoulders.

Having completed the sculpting and manipulation work in Blender, I used Project Miller to shrink-wrap a new high-definition mesh around the model to deal with all the self-intersections where the fingertips touch the thighs. A little more cleaning up to fix the normals and adding a base for her to stand on gave me a printable model.

I printed a full sized copy first on my E3D BigBox which has Independent Dual Extrusion on X carriage (IDEX) so that I could use PolySupport break-away material for the few remaining places that needed it, mainly under the nose and some folds of hair.
 
  
The print started out very well but the higher it got, the more the model started to wobble with each pass of the printhead. I resorted to using hot glue and chopsticks as described  in this video and managed to rescue the model albeit with some artifacts that you can see in the face and hair.

I decided to do some more printing to do this beautiful model justice and hit upon the idea of rotating her backwards 45 degrees and printing only the top half. The main benefit of doing this was to remove the need for any support material at all. This in turn meant that I could switch to using my new Creality CR-10S printer combined with some fabulous Fillamentum Vertigo Grey filament.



I'll let the results speak for themselves.






Saturday 25 June 2016

80,000 views

In celebration of reaching 80,000 page views, here is a brand new sculpture I created to print on my new 3D printer. I started from this photo found on Pinterest. Unfortunately, I haven't been able to identify the model or the photographer. If anyone has any information, please let me know.



I use Daz Studio 4.9 to create a pose using the Olympia 7 model and Sally G3 hair. Here is the model in the Daz Studio interface.



After exporting the model from Daz Studio I used Project Miller to reskin the model and Blender to shrink-wrap the hair. I did a considerable amount of work using the sculpt tools in Blender to improve the look and shape of the hair whilst keeping it as printable as possible. Here is a screen grab of the final STL file.




I recently upgraded to a BigBox3D from E3Donline and here is the model printed using grey Edge filament.







A nice addition to the collection!